How to Restore Concrete Floors

What is all the talk about “Polished Concrete Floors?” Polishing and grinding concrete floors has been a topic of discussion over the past few years, and I’ve been asked so many times what it’s all about, that I decided to write this article. Hard surface floors have amazingly been around since the time of the Roman Empire. It took an enormous amount of labor, and a lot of ingenuity to split large stones, and hone them down to make slabs suitable for flooring in buildings. To get more specific than that is mind boggling, kind of like, “How did they build the Pyramids in Egypt? ” My answer is, “I sort of know how they did it, but I’m glad I didn’t have to do the work”.
Building owners have wanted different types of flooring over the concrete to give a building a warmer and cleaner feel. In industrial facilities they have used tile, rolled linoleum, floor paint, or epoxy to give a building a more desirable appearance, and make it easier to clean than bare concrete. That works for a while, but every one of those products eventually wears out and requires replacement. That brings us up to the present time. click here for more information.
Abatement is a tedious, and time consuming process, but it has to be done, before you can begin the process of restoring the concrete floor underneath. You cannot do it yourself! Asbestos Abatement requires countless hours of training, certification, annual re-certification, special equipment, and people who are crazy enough to want to do it. Just kidding! Luckily, there are people who enjoy that type of work, and take pride in providing an excellent finished product. for further details, visit : https://www.concreate.net/

 

How to Restore Concrete Floors
Due to the cost of the abatement, and the fact that they will need to tent off areas while the abatement is going on, there will be some need for some logistical planning. What you don’t want to do is put it off, hoping the problem will cure itself, or go away. That’s not going to happen. It doesn’t happen that often, but I have seen instances where the inspectors come in and demand that the problem is corrected before the building can be used again. That’s ugly! to know more about flooring , visit : http://www.theflooringlady.com/

THEN WHO SHOULD I TALK TO?

You can hire a very reputable concrete grinding and polishing professional, who only does floors, for a lot less money than you would expect. They can grind, polish, seal, dye, or apply one of hundreds of products to your floor for the same or less money than re-applying tile which doesn’t have the same resiliency and longevity as the previous asbestos tile products.

WARNING!

Epoxy is not easily repairable, and carries “NO” warranty, if strict recommendation for its care are not observed. Don’t expect the contractor to come back a week after your beautiful floor was redone to fix tire marks in your shop. It’s not possible! If you want a floor that is less sensitive, then you should probably consider application of a penetrating dye, followed by sealer to give you an attractive floor finish which is going to be less susceptible to marring and scratching.

So you are going to have to trust your contractor to advise you on the right product, and look at some comparisons on the products on the Internet.

 

Share Button