If there are any problems, who do I call?
Most flooring stores will be buying the flooring they are selling to you from a distributor who purchases the flooring from the manufacturer. Sometimes, especially with products coming from overseas, there is more than one distributor involved. In many cases, if you have an issue with your flooring and complain to the retailer, they will call the distributor and let them know there is a complaint, the distributor will then tell the manufacturer that there has been a complaint. In most cases, the manufacturer will deny the complaint and if you are lucky they will even send a representative to deny your claim in person. click here for related information.
How durable is the finish?
Durability is probably the most important things to consider when purchasing a prefinished hardwood floor. The finish is what you are actually walking on and must be very durable to have a beautiful lasting floor for years to come. Many imported prefinished floors have very little durability and the finish can be taken off with a few swipes of 150 grit sandpaper. When buying hardwood there are a few ways to test the finish: one would be to take 150 grit sandpaper and rub the finish to see if the finish will come off and two would be to firmly press the edge of a coin against the finish, a quality finish will dent but not come off. I know that may seem a little strange, but it’s something worth checking, because hardwood flooring is a big investment and you want to know the durability of the finish. for further details, visit :https://www.cpsc.gov/Taxonomy/Products/Home-Appliances-Maintenance-and-Structures/Flooring/Hardwood-Floors/
What is the structural and surface warranty?
This is a very important part of choosing a hardwood floor. Anyone can put a 25, 30, or 40-year warranty on the finish of their product but the real question is; will they stand behind their warranty? Many large hardwood flooring manufacturers have warranties that are up to ten pages. When you read through the entire warranty and all of the exclusions it really gives the client the impression that there is actually no warranty at all. The problem is most consumers don’t take the time to read the warranty and are shocked when they find out the issue they are having with the flooring is one of the “exclusions”.
What is the waste factor of the flooring?
The waste factor of the flooring is an important issue as well. If 10-15% waste is what is suggested by the manufacturer than that means you will have to buy that much more to get enough to install your entire floor. The higher the recommended waste factor the lower quality the product. You may find when comparing products for price on may be more than the other, but you must factor in the difference in waste to the price. A floor for $6 with 3% waste would cost you $6.18 which would be the same cost as a floor with 10% waste that is $5.62 and the product with 3% waste would definitely be a higher quality product.
What is the average length of the flooring boards?
The question of the average board lengths is one that is not commonly asked when it comes to hardwood flooring. It is something not a lot of people think about until it is brought up. The longer the average length of the floor the better the floor looks especially in large rooms. One foot and two foot lengths produce a very choppy and unattractive floor. The box size is not the only way to tell what the average length is; you can have an 8′ box with all short pieces in it. Many offshore manufactured products are in four foot boxes with will definitely ensure you are getting a floor with very short lengths.
What is the moisture content of the flooring?
Moisture content is a very important factor when installing hardwood flooring. You need the flooring to be at a proper moisture level for your home/interior climate which is typically between 6-9% moisture content. Installing hardwood flooring with a moisture content that is too high will cause spaces in the floor when the flooring dries out, and installing a hardwood floor that is too dry will result in cupping when the flooring picks up moisture.
What does the supplier recommend for acclimation?
I know you must have heard someone say, “the flooring must sit in your home for two weeks prior to installation”. This is a very general statement and in most cases will do more harm than good toyour hardwood floor. If you did this in a new home and it sat in the home while they were dry walling, painting, the wood would be so damp by the time you installed it that you would just be asking for trouble.
What does the stain/finish look like?
Many large manufactures will finish all different woods at the same time without making adjustments for each wood because each time they make adjustments it effects the production. The fact is, each wood needs to be finished differently to achieve the nicest stain/finish. Oak requires more finish to “fill in” the grain or else it will appear very pitted which is not something desirable in an oak floor.
Does the supplier warrant the work done by their installers?
If you are purchasing flooring from a company and having your own contractor install the flooring you want to make sure your installer is a professional. In many cases if you use your own contractor and there is an issue you will have the installer blaming the issue on the hardwood and the manufacturer blaming the issue on the installer.
What grade is the flooring?
Comparing flooring by grades can be very confusing and misleading. Many large manufacturers have five or six different grades of flooring so just because brand A has a less expensive product than brand B they may not be the same or even a similar grade. There is really no standard grading system for prefinished flooring, so just because the product is labeled “select and better” may not mean it is the best quality flooring.